Differences

This shows you the differences between two versions of the page.

--- t4_flashdisk [2024/04/26 19:46] – [File Considerations] tony
+++ t4_flashdisk [2024/06/11 20:47] (current) – tony
@@ Line 1: / Line 1: @@
-=====The Flash Disk=====
+=====Onboard Storage=====
-There is 175k of non-volatile file storage available on the Twiddler.  It is accessible only when the Twiddler is connected to your computer via USB.  It should mount as a FAT formatted Removable Hard Drive.  Both the Twiddler Config (4 x *.cfg) and Re-Chorded log (4 x *.log) files are stored on the root of this drive.
+There is a small amount of storage available on the Twiddler. \\
+It is used to store your **Config** (4 x *.cfg), **Re-Chorded log** (4 x *.log) and **Firmware upgrade** (1 x TWIDDLER.BIN) files. All other file types will not be stored on the Twiddler. \\
+Storage is only accessible when the Twiddler is connected to your computer via USB.  \\
+It should mount as a FAT formatted Removable Hard Drive on your host device.  \\
 ====File Considerations====
@@ Line 12: / Line 15: @@
 |2.cfg| 2nd custom config slot|
 |3.cfg| 3rd custom config slot|
+\\
+**NOTE:** Once a config file has been copied to the Twiddler, the USB cable needs to be unplugged in order to confirm and commit that file to storage.
 ===Twiddler Re-Chorded Log Files===
@@ Line 24: / Line 29: @@
 All log files can be selected and written to when in Re-Chorded mode.  Just keep in mind that there is a hard 64K limit on the size of each log file.
-====Formatting the Flash Disk====
-There are times that you may wish to reformat the Twiddler's flash disk.  This procedure is safe and will not affect the firmware on the Twiddler.  Just remember to backup the data on the drive as formatting it will wipe it clean.
-The drive must be [[wp>File_Allocation_Table#FAT12|FAT Formatted]].

Twiddler

User Tools

Site Tools

Differences

Page Tools