Using the Twiddler 4
Using the Twiddler 3
Twiddler Tuner
Typing Tutor
Twiddler Technical
Twiddler Legacy Instructions
Using the Twiddler 4
Using the Twiddler 3
Twiddler Tuner
Typing Tutor
Twiddler Technical
Twiddler Legacy Instructions
This is an old revision of the document!
There is a small amount of storage available on the Twiddler.
It is used to store your Config (4 x *.cfg), Re-Chorded log (4 x *.log) and Firmware upgrade (1 x TWIDDLER.BIN) files.
Storage is only accessible when the Twiddler is connected to your computer via USB.
It should mount as a FAT formatted Removable Hard Drive on your host device.
There are four (4) Twiddler Config files stored on the Twiddler 4
File Name | Purpose |
---|---|
0.cfg | Reserved - Default Config |
1.cfg | 1st custom config slot |
2.cfg | 2nd custom config slot |
3.cfg | 3rd custom config slot |
There are four (4) Twiddler Re-Chorded log files stored on the Twiddler 4
File Name | Purpose |
---|---|
0.log | 1st custom config slot |
1.log | 2nd custom config slot |
2.log | 3rd custom config slot |
3.log | 4th custom config slot |
All log files can be selected and written to when in Re-Chorded mode. Just keep in mind that there is a hard 64K limit on the size of each log file.